Sony SLV-SE600A Operating Instructions Manual Download Page 87

Page: 87 / 96

Troubleshooting

ditio

al Inf

ion

Syn

Reco

The SYNCHRO REC
button turns off while
recording or does not go
back to recording standby
mode.

• The tape has reached its end. Insert a new tape and press

SYNCHRO REC again.

The Synchronized
Recording function does not
work.

• The connected equipment was not turned off.

Turn off the connected equipment and press SYNCHRO REC
again.

• There was a power failure. Press SYNCHRO REC again.

The programme recorded
with the Synchronized
Recording function is
incomplete.

• If the settings for timer recordings and Synchronized Recording

overlap, the programme that starts first has priority and the second
programme starts recording only after the first programme has
finished.

• There was a power failure. Press SYNCHRO REC again.

Y-

You cannot set channels as
PAY-TV/Canal Plus in the
TUNER menu.

• Check that DECODER/LINE3 (or DECODER/LINE2) in the

OPTIONS-2 menu is set to DECODER (see page 79).

You cannot watch PAY-TV/
Canal Plus programmes
when the VCR is in standby
mode.

• Check that DECODER/LINE3 (or DECODER/LINE2) in the

OPTIONS-2 menu is set to DECODER (see page 79).

• Make sure the PAY-TV/Canal Plus Scart cable is plugged securely.

A PAY-TV/Canal Plus
programme is always
recorded scrambled.

• Make sure the PAY-TV/Canal Plus Scart cable is plugged securely.
• Check that DECODER/LINE3 (or DECODER/LINE2) in the

OPTIONS-2 menu is set to DECODER (see page 79).

• Check that this channel is set as PAY-TV/Canal Plus in the

TUNER menu (see page 37).

Symptom

Remedy

continued

Summary of Contents for SLV-SE600A

































































































Search results

Summary of Contents for SLV-SE600A

Reviews:

Related manuals for SLV-SE600A

Brands by name

Popular brands

Sony SLV-SE600A, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE600A

Reviews:

Related manuals for SLV-SE600A

Brands by name

Popular brands