Sony SLV-SE600A Operating Instructions Manual Download Page 56 | Manualshive

Page: 56 / 96

background image

56

Recording TV programmes using the ShowView system (not available on SLV-SE600A/E and SX600E)

To record satellite broadcasts

If you connect a satellite tuner and the VCR, you can record satellite programmes.

To use the VCR after setting the timer

To use the VCR before a recording begins, just press

?

/

1

. The

indicator turns off

and the VCR switches on. Remember to press

?

/

1

to reset the VCR to recording

standby after using the VCR.

You can also do the following tasks while the VCR is recording:

• Reset the counter (page 42).
• Display tape information on the TV screen (page 45).
• Check the timer settings (page 68).
• Watch another TV programme (page 45).

Tips

• To set the programme position, you can also use the PROG +/– or programme number

buttons.

• To set the programme position with a two digit number, press

-

(ten’s digit) button followed

by the programme number buttons.

• To set the line input video source, you can also use the PROG +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape becomes

shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1
menu (page 79).

• To check, change, or cancel the programme setting, press

<

/

,

to choose LIST, then press

OK in step 4. For details, see step 3 in “Checking/changing/cancelling timer settings” (page
68).

Notes

• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC

signals, the VCR will start recording at the set time without using the VPS/PDC function.

• The

indicator flashes in the display window when you press

?

/

1

with no tape inserted.

• When you set TIMER OPTIONS to STANDARD in the OPTIONS-2 menu, the

SHOWVIEW menu does not appear on the TV screen. Select SHOWVIEW or VARIABLE.

• The VPS/PDC function is automatically set to OFF for the timer recording of a satellite

programme.

• The station name may not appear if the VCR does not receive station name information

signals.

1

Turn on the satellite tuner.

2

On the satellite tuner, select the satellite programme for which you want to make
a timer setting.

3

Follow steps 1 through 6 above.

4

Keep the satellite tuner turned on until the VCR finishes recording the satellite
programme for which you have made a timer setting.

«
...
54
55
56
57
58
...
»

Summary of Contents for SLV-SE600A

































































































Reviews:

No comments

Related manuals for SLV-SE600A

Brand: Audiovox Pages: 30

Brand: Daewoo Pages: 22

Brand: Symphonic Pages: 30

Brand: SOUNDMASTER Pages: 35

Brand: RCA Pages: 56

Brand: RCA Pages: 42

Brand: Ganz Pages: 33

Brand: Daewoo Pages: 24

Brand: Magnasonic Pages: 32

Brand: Panasonic Pages: 104

Brand: Panasonic Pages: 143

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 86

Brand: Philips Pages: 2

Brand: Philips Pages: 16

Brand: Philips Pages: 2

Brand: Philips Pages: 28

Brand: Sony Pages: 53

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands