Sony SLV-SE40EG Operating Instructions Manual Download Page 64

Page: 64 / 72

Additional Information

Symptom

A tape cannot be inserted.

The remote commander does
not function.

The SMARTLINK function
does not work.

The tracking meter does not
appear on the TV screen.

The VCR needs to be cleaned.

Others

Remedy

• Check that a tape isn’t already in the tape

compartment.

• Make sure you are pointing the remote commander at

the remote sensor on the VCR.

• Replace all the batteries in the remote commander with

new ones if they are weak.

• Make sure the TV / VIDEO remote control switch is

set correctly.

• Check that your TV complies with SMARTLINK,

MEGALOGIC, EASYLINK, Q-Link, or EURO VIEW
LINK.

• Make sure you use the optional EURO-AV cable to

connect the VCR and your TV.

• Make sure the EURO-AV cable is connected securely.

• The recording condition of the tape is very poor and

tracking cannot be adjusted.

• The tracking meter does not appear when playing back

an NTSC-recorded tape.

• Clean the cabinet, panel and controls with a dry, soft

cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.

Troubleshooting (continued)

Summary of Contents for SLV-SE40EG









































































Search results

Summary of Contents for SLV-SE40EG

Reviews:

Related manuals for SLV-SE40EG

Brands by name

Popular brands

Sony SLV-SE40EG, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE40EG

Reviews:

Related manuals for SLV-SE40EG

Brands by name

Popular brands