Sony SLV-SE350K Operating Instructions Manual Download Page 85

Page: 85 / 100

Audio dubbing (SLV-SE500K/R and SE800N/K only)

Editin

To stop editing

Press

STOP on this VCR and the stereo system (or other VCR).

To listen to both the hi-fi and normal audio
(not available on SLV-SE350K and SE500K/R)

Set AUDIO MIX to ON in the OPTIONS-1 menu (page 78). Use this feature to listen
to dubbed audio over the original hi-fi audio. When AUDIO MIX is set to ON, the
AUDIO MONITOR button does not function.

Remember to reset AUDIO MIX to OFF after playing the tape.

Note

• If you eject the tape or turn the VCR off, AUDIO MIX is automatically set to OFF.

* SLV-SE500K/R does not have the AUDIO R (right) jack.

To start editing, press the

(pause) buttons on this VCR and the stereo system

(or other VCR) at the same time.

After you use this feature, the audio in playback mode is automatically set to
monaural.

Summary of Contents for SLV-SE350K





































































































Search results

Summary of Contents for SLV-SE350K

Reviews:

Related manuals for SLV-SE350K

Brands by name

Popular brands

Sony SLV-SE350K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE350K

Reviews:

Related manuals for SLV-SE350K

Brands by name

Popular brands