Sony SLV-SE350K Operating Instructions Manual Download Page 84

Page: 84 / 100

Audio dubbing (SLV-SE500K/R and SE800N/K only)

Audio dubbing

(SLV-SE500K/R and SE800N/K only)

This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.

Before you start...

• Open the LINE-2 IN AUDIO L/R jacks

cover on the front panel and connect a
playback source.*

• Turn on the TV and set it to the video

channel.

Insert a source tape into your stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.

Insert a prerecorded tape with its safety tab in place into this (recording) VCR.
Search for the start of the section to be replaced and press

(pause).

The VCR enters pause mode.

Press AUDIO DUB.

The programme position changes to “L2,” and the indicator appears in the
display window.

AUDIO DUB

CLEAR

Summary of Contents for SLV-SE350K





































































































Search results

Summary of Contents for SLV-SE350K

Reviews:

Related manuals for SLV-SE350K

Brands by name

Popular brands

Sony SLV-SE350K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE350K

Reviews:

Related manuals for SLV-SE350K

Brands by name

Popular brands