Sony SLV-M11HF - Video Cassette Recorder Operating Instructions Manual Download Page 31

Page: 31 / 76

Additional Operations

Searching using
the index
function

The VCR marks the tape with an index
signal at the point where each recording
begins. Use these signals as references
to find a specific recording. The VCR
can search up to 99 index signals ahead
of or behind the current position.

Insert an indexed tape into the VCR.

Press

INDEX SEARCH repeatedly to specify how many

index signals ahead or behind you want to search:

• To search ahead, press

INDEX

SEARCH.

• To search backwards, press

INDEX

SEARCH.

The VCR starts searching and the index
number on the TV screen counts down to
zero. Playback starts automatically from
that point.

To stop searching

Press

STOP.

Note

• No index signal will be added when recording starts from recording pause.

However, an index signal will be marked if you change the program position
during recording pause.

INDEX
SEARCH

NDEX

Summary of Contents for SLV-M11HF - Video Cassette Recorder













































































Search results

Summary of Contents for SLV-M11HF - Video Cassette Recorder

Reviews:

Related manuals for SLV-M11HF - Video Cassette Recorder

Brands by name

Popular brands

Sony SLV-M11HF - Video Cassette Recorder, Operating Instructions Manual

Search results

Summary of Contents for SLV-M11HF - Video Cassette Recorder

Reviews:

Related manuals for SLV-M11HF - Video Cassette Recorder

Brands by name

Popular brands