Sony SLV-EZ121AZ Operating Instructions Manual Download

Page: 64 / 68

Additional Information

Playback

The sound from a tape
recorded with the VCR is not
in stereo or the STEREO
indicator in the display
window is flashing.

Symptom

Remedy

• Adjust the tracking.
• The video heads are dirty. Clean the video heads

using the Sony T-25CLD, E-25CLDR, or T-25CLW
video head cleaning cassette as explained above.

No TV programme appears on
the TV screen.

• Make sure the TV is set to the video channel. If you

are using a monitor, set it to video input.

• Existing broadcasts may interfere with the VCR.

Reset the RF channel output of your VCR (see
page 17).

• Select the correct source with the INPUT SELECT

button. Select a programme position when recording
TV programmes; select a line input when recording
from other equipment.

TV reception is poor.

• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
• Make sure the TV system is correctly set for your TV.
• Make sure TV SYSTEM (B/G or B/B) in the

INSTALLATION menu is set to the same system in
your local area.

The recorded picture has no
colour or unusual colour.

• Set COLOUR SYSTEM in the USER SET menu

according to your local colour system.

The tape starts playing as
soon as it is inserted.

• The safety tab has been removed. To record on this

tape, cover the tab hole (see page 34).

The tape is ejected when you
press

REC.

• The safety tab has been removed. To record on this

tape, cover the tab hole (see page 34).

• The tape is defective.
• If you made A/V connections, check the audio cable

connection.

• If you made connections using the aerial cable only,

make sure the TV system is set correctly for your
area.

The picture has no sound.

Recor

ding

Nothing happens when you
press

REC.

• Make sure the tape is not at its end.

Troubleshooting (continued)

Summary of Contents for SLV-EZ121AZ





































































Search results

Summary of Contents for SLV-EZ121AZ

Reviews:

Related manuals for SLV-EZ121AZ

Brands by name

Popular brands

Sony SLV-EZ121AZ, Operating Instructions Manual

Search results

Summary of Contents for SLV-EZ121AZ

Reviews:

Related manuals for SLV-EZ121AZ

Brands by name

Popular brands