Getting Started
9
Getting Started
Step 5
1
Press RF CHANNEL on the VCR.
The RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
2
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
3
Tune the TV to the same channel as that
shown in the display window so that
the picture on the right appears on the
TV screen.
Refer to your TV manual for tuning
instructions.
If the picture does not appear clearly,
see “To obtain a clear picture from the
VCR” on page 10.
4
Press RF CHANNEL.
You have now tuned your TV to the VCR. Whenever you want to
play a tape, set the TV to the video channel.
RF CHANNEL
P/–
Tuning your TV to the VCR
If you connect the VCR to your TV using the EURO-AV cable, skip this step.
RF CHANNEL
AUTO SET UP
SONY VIDEO CASSETTE
RECORDER
continued
RF CHANNEL
AUTO SET UP
