Sony SLV-E120AE, Service Manual

Page: 28 / 69

5-13
3-6. FE HEAD AND ACE HEAD
3-6-1. AUDIO R/P HEAD ASSEMBLY (ACE HEAD)
(See Fig. 3-6-1 )
1) Unplug the connector from the audio R/P head assem-
bly (ACE head).
2) Remove the two screws
1
and the audio R/P head
assembly (ACE head)
2
.
ASSEMBLY NOTES:
1. Align the hole
3
on the audio R/P head assembly
(ACE head) with the pin
4
on the chassis unit.
2. After assembly, check that the clamp
5
on the cleaner
roller assembly has snapped into the mounting of the
audio R/P head assembly (ACE head)
2
.
3. After assembly, clean the surface of the head with a
soft cloth or chamois.
4. After assembly, refer to section 4-3, and adjust the
head height, the azimuth and the tracking (X) position.
1
Screws
2
Audio R/P head assembly
(ACE head)
3
Hole
5
Clamp
4
Pin
Fig. 3-6-1
3-6-2. FULL ERASE HEAD (See Fig.3-6-2)
1) Unplug the connector from the full erase head
1
.
2) Remove the screw
2
and the full erase head
1
.
ASSEMBLY NOTE:
1. After assembly, clean the full erase head
1
.
2
Screw
1
Full erase head
Fig. 3-6-2