manualshive.com logo in svg

Sony SLV-797HF, Operating Instructions Manual

The Sony SLV-797HF Operating Instructions Manual is a comprehensive guide for seamlessly operating the SLV-797HF model. This user-friendly manual assists users in maximizing the product's potential, and is available for free download at manualshive.com. Empower your Sony experience with this must-have manual!

Share
Download
background image

Introduction

2

 WARNING

To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION :  TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the

product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance

(servicing) instructions in the literature
accompanying the appliance.

• Do not place the unit on surfaces (rugs,

blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation slots.

• Do not install the unit near heat sources

such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.

• Do not install the unit in an inclined

position.  It is designed to be operated in a
horizontal position only.

• Keep the unit and cassettes away from

equipment with strong magnets, such as
microwave ovens or large loudspeakers.

• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to

a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape.  When you first install
the unit, or when you move it from a cold to
a warm location, wait for about one hour
before operating the unit.

Information

For customers in the USA

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.  This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.  However, there is no
guarantee that interference will not occur in a
particular installation.  If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

Caution

Television programs, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws.  Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmission and/or program owner.

CAUTION

To prevent electric shock, do not use this
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.

WARNING

The AC power cord must be changed at
qualified service shop.

Precautions

Safety

• Operate the unit only on 120 V AC, 60 Hz.
• If anything falls into the cabinet, unplug the

unit and have it checked by qualified
personnel before operating it any further.

• This unit is not disconnected from the AC

power source (mains) as long as it is
connected to the wall outlet, even if the unit
itself has been turned off.

• One blade of the plug is wider than the

other for the purpose of safety and will fit
into the power outlet only one way. If you
are unable to insert the plug fully into the
outlet, contact your Sony dealer.

• Unplug the unit from the wall outlet if you

do not intend to use it for an extended
period of time.  To disconnect the cord, pull
it out by the plug, never by the cord.

Installing

• Allow adequate air circulation to prevent

internal heat buildup.

Summary of Contents for SLV-797HF
































































































Reviews:

No comments

Related manuals for SLV-797HF

Symphonic SC3813 Owner'S Manual preview
SC3813
Brand: Symphonic Pages: 30
NEC VN-23 User Manual preview
VN-23
Brand: NEC Pages: 39
NEC VN-212 User Manual preview
VN-212
Brand: NEC Pages: 45
Philips Magnavox VPA115AT Specification Sheet preview
Magnavox VPA115AT
Brand: Philips Pages: 2
Philips 14PV112 Specifications preview
14PV112
Brand: Philips Pages: 2
Philips 14 PV 375 Specifications preview
14 PV 375
Brand: Philips Pages: 2
Philips 14PV010 (Dutch) Technical Specifications preview
14PV010
Brand: Philips Pages: 2
Philips 14 PV 274 Specification Sheet preview
14 PV 274
Brand: Philips Pages: 2
Philips 14 PV 110 Specifications preview
14 PV 110
Brand: Philips Pages: 2
Philips 14 PV 111 Specifications preview
14 PV 111
Brand: Philips Pages: 2
Philips 14PV111/01 User Manual preview
14PV111/01
Brand: Philips Pages: 16
Philips 14PV111 User Manual preview
14PV111
Brand: Philips Pages: 16
Philips 14PV110 Manual preview
14PV110
Brand: Philips Pages: 24
Philips 14PV100 Operating Instructions Manual preview
14PV100
Brand: Philips Pages: 24
Philips 14PV100/01/07/58 Service Manual preview
14PV100/01/07/58
Brand: Philips Pages: 34
Philips 14 TVCR 240 Operating Instructions Manual preview
14 TVCR 240
Brand: Philips Pages: 34
Philips 14PV111/01 Service Manual preview
14PV111/01
Brand: Philips Pages: 66
Philips 14PV110/01 Service Manual preview
14PV110/01
Brand: Philips Pages: 114

Brands by name

Popular brands

Load more brands