Sony SL-EZ131AZ Operating Instructions Manual Download Page 65

Page: 65 / 68

Additional Information

Additional Information

imer recording

Symptom

Remedy

The timer does not operate.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings are past the current

time.

• The clock stops if the VCR is disconnected from the

mains. Reset the clock and timer.

• Turn the power off and unplug the mains lead.

A tape cannot be inserted.

• Check that a tape is not already in the tape

compartment.

The remote commander does
not function.

• Make sure you are pointing the remote commander at

the remote sensor on the VCR.

• Replace all the batteries in the remote commander

with new ones if they are weak.

• Make sure the •TV/VIDEO remote control switch is

set correctly.

The selected input line
connector number does not
appear in the display window.

• Press INPUT SELECT to display the connected line.

• The recording condition of the tape is very poor and

tracking cannot be adjusted.

The VCR needs to be cleaned.

The display window becomes
dim.

• The display window automatically becomes dim

when the VCR is in standby mode.

The tracking meter does not
appear on the TV screen.

• Clean the cabinet, panel and controls with a dry, soft

cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.

continued

Others

Summary of Contents for SL-EZ131AZ





































































Search results

Summary of Contents for SL-EZ131AZ

Reviews:

Related manuals for SL-EZ131AZ

Brands by name

Popular brands

Sony SL-EZ131AZ, Operating Instructions Manual

Search results

Summary of Contents for SL-EZ131AZ

Reviews:

Related manuals for SL-EZ131AZ

Brands by name

Popular brands