![background image](http://html.mh-extra.com/html/sony/shake5/shake5_operating-instructions-manual_1330195023.webp)
model name [SHAKE-5]
[4-462-816-
12
(1)] GB
23
GB
filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF
02)\4462816121_GB\06BAS.fm]
masterpage:Right
Blu
e
tooth
x
For an NFC-compatible
smartphone
Touch the smartphone to the N-Mark on
the system to establish the
Bluetooth
connection.
Start playback of an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.
To disconnect the
Bluetooth
device
x
For a
Bluetooth
device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display
panel.
Depending on the
Bluetooth
device, the
Bluetooth
connection may be canceled
automatically when you stop playback.
x
For an NFC-compatible
smartphone
Touch the smartphone to the N-Mark on
the system again.
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth
function.
“BLUETOOTH” appears in the
display panel.
If the system is connected to a
Bluetooth
device, the
Bluetooth
device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth
device.
2
Hold down OPTIONS and
PHASER for about 3 seconds.
“PAIR HISTORY” and “CLEAR”
appear in the display panel and all the
pairing information is erased.
Setting the
Bluetooth
audio codecs
You can select the
Bluetooth
audio codecs
when the connected
Bluetooth
device
supports Advanced Audio Coding
(AAC).
1
Press OPTIONS on the unit.
2
Press
/
repeatedly to select
“BT AAC”, then press
.
3
Press
/
repeatedly to select
“BT AAC ON” or “BT AAC OFF”.
• BT AAC ON: Advanced Audio
Coding (AAC) is selected if the
Bluetooth
device supports AAC.
• BT AAC OFF: Sub Band Codec
(SBC) is selected.
Notes
• You can enjoy high quality sound if the AAC
is selected. In case you cannot listen to AAC
sound from your device, select “BT AAC
OFF”.
• If you change this setting while the system is
connected to a
Bluetooth
device, the
Bluetooth
device will be disconnected. To
connect to the
Bluetooth
device, perform the
Bluetooth
connection again.
Erasing all the pairing
registration information