background image

model name [SHAKE-5]

[4-462-816-

12

(1)] GB

13

GB

filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF 
02)\4462816121_GB\06BAS.fm]

masterpage:Right

Disc

/USB Pla

y

bac

k

Before using the USB 
device with this system

Check the websites for the information 
about compatible USB devices (page 30).

To select the playback source or 
transferring destination (USB 
memory select)

If the USB device has more than one 
memory (for example, internal memory 
and a memory card), you can select which 
memory to use as a playback source or 
transferring destination.
Use the buttons on the unit to perform this
operation.

Note

You cannot select a memory during playback or 
transfer. Make sure to select a memory before 
starting playback or transfer.

1

Press USB/USB SELECT 
repeatedly until “USB A” or “USB B” 
lights up in the display panel.

2

Connect the USB device to the 

or B 

port.

3

Press OPTIONS when playback is 
stopped.

4

Press 

/

 to select “USB MEM 

SEL”, then press ENTER.

5

Press 

/

 to select the memory 

you want, then press ENTER.

Playing a USB device

The audio formats that can be played back 
by this system are as follows:
– MP3: file extension “.mp3”
– WMA: file extension “.wma”
– AAC: file extension “.m4a”, “.mp4” or 

“.3gp”

If the audio files have the above file 
extension but are not the respective 
formats, the system may produce noise or 
may malfunction.

1

Press

 

USB repeatedly until 

“USB A” or “USB B” lights up in 
the display panel.

2

Connect a USB device to the 

or B 

port.

Note

You can use a USB adaptor (not supplied) to 
connect the USB device to the unit if the 
USB device cannot be plugged into the    
port.

3

Press 

N

.

The audio files are played back in 
different orders depending on the play 
mode.

USB device

Summary of Contents for SHAKE5









































Reviews: