3-5
SEL1224G
3-5. SELECTION PARTS
Ref. No. 5 1 GROUP TILT WASHER
(for optical axis adjustment)
This part is for optical axis adjustment.
Adjust the thickness by following the results of the optical axis check.
Thickness (mm)
Part No.
0.02
4-696-666-01
0.03
4-696-666-11
0.05
4-696-666-21
0.09
4-696-666-31
0.12
4-696-666-41
0.15
4-696-666-51
0.20
4-696-666-61
0.25
4-696-666-71
0.30
4-696-666-81
Ref. No. 6 1 GROUP SPACER WASHER
(for resolving power adjustment)
This part is for resolving power adjustment.
Adjust the thickness by following the results of the resolving power
check.
Thickness (mm)
Part No.
0.02
4-696-667-01
0.03
4-696-667-11
0.05
4-696-667-21
0.08
4-696-667-31
0.10
4-696-667-41
0.15
4-696-667-51
0.20
4-696-667-61
0.25
4-696-667-71
0.30
4-696-667-81
0.35
4-696-667-91
Ref. No. 55 FB WASHER
(for resolving power adjustment)
This part is for resolving power adjustment.
Adjust the thickness by following the results of the resolving power
check.
Thickness (mm)
Part No.
0.02
4-696-674-01
0.03
4-696-674-11
0.05
4-696-674-51
0.10
4-696-674-21
0.15
4-696-674-31
0.20
4-696-674-41
Ref. No. 112 Z JOINT PIECE
Perform an operation check of the relevant locations, and select an
appropriate part.
D1
D1 (mm)
Part No.
4.79
4-696-673-01
4.80
4-696-673-11
4.81
4-696-673-21
4.82
4-696-673-31
Continued on next page.