background image

5

IMPORTANT SAFEGUARDS

For your protection, please read these
safety instructions completely before
operating the appliance, and keep this
manual for future reference.

Carefully observe all warnings,
precautions and instructions on the
appliance, or the one described in the
operating instructions and adhere to
them.

USE

Power Sources –

 This unit should be

operated only from the type of power
source indicated on the marking label.
If you are not sure of the type of
electrical power, consult your dealer or
local power company.

For the unit with a three-wire
grounding type ac plug:

If you are unable to insert the plug into
the outlet, contact your electrician to
have a suitable plug installed.  Do not
defeat the safety purpose of the
grounding plug.

AC Power cord: (for AC mains
operating unit only)

The AC power cord should have
appropriate safety approvals or
marking for the country in which the
equipment will be used.  Consult your
dealer or local power company.

Cleaning –

 Unplug the unit from the

wall outlet before cleaning or
polishing it.  Do not use liquid
cleaners or aerosol cleaners.
Use a cloth lightly dampened with
water for cleaning the exterior of the
unit.

Object and Liquid Entry –

 Never

push objects of any kind into the unit
through openings as they may touch
dangerous voltage points or short out
parts that could result in a fire or
electric shock.  Never spill liquid of
any kind on the unit.

• Por medio de la presente Sony

Corporation declara que el
SDX-870V/AIT Drive cumple con
los requisitos esenciales y
cualesquiera otras disposiciones
aplicables o exigibles de la
Directiva 1999/5/CE. Para mayor
información, por favor consulte el
siguiente URL: http://
www.compliance.sony.de/

• Härmed intygar Sony

Corporation att denna
SDX-870V/AIT Drive står I
överensstämmelse med de
väsentliga egenskapskrav och
övriga relevanta bestämmelser
som framgår av direktiv 1999/5/
EG. För ytterligare information
gå in på följande hemsida: http://
www.compliance.sony.de/

Summary of Contents for SDX-470V Series

































Reviews: