26
z
Playback from the last stopping point
(Resume Play)
1
During playback, press the
x
STOP or
a
button on the DVD
remote control to stop play.
The message, “Press [Play] to resume viewing. To start from the
beginning, press [Stop] and then [Play].” will appear on the screen.
2
Press the
H
PLAY button on the DVD remote control.
Playback begins from the point in step 1 where it was stopped.
Using the Control Panel
1
During playback, use the directional buttons to move to the
x
(Stop) icon of the Control Panel and press the
✕
button to
stop playback.
2
Select the
N
(Play) icon and press the
✕
button.
Playback begins from the point in step 1 where it was stopped.
Notes
• To play the disc from the beginning, press
x
one more time after stopping
playback, then press
H
.
• Resume Play may not be available on some DVD discs.
• Depending on where you stopped the disc, the console may resume play from a
slightly different point.
• The recording of the point where playback was stopped is cleared when:
– you open the disc tray
– you shift to standby mode by pressing and holding down the
1
(standby)/
RESET button
– you turn the power off using the MAIN POWER switch on the console rear
– you start playback after selecting a title or chapter.
x
N
Viewing a DVD video (continued)
