Sony SCH-735, User Manual

Page: 14 / 25

COLOR CCD CAMERA User Guide
26
COLOR CCD CAMERA User Guide
27
How to Use the Camera
INDOOR : Select this when the color temperature is between 4,500 º K and 8,500 º K .
UTDOOR : Select this when the color temperature is between 1,800 º K and
10,500 º K. (sodium light inclusion)
AWC
→
SET : To find the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press
the SET button. If the environment changes, readjust it.
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-
tune the White Balance and then press the SET button.
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras,
by adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select ’BACKLIGHT‘ by using the Up
and Down buttons so that the arrow indicates ’BACKLIGHT‘.
BACKLIGHT
• White Balance may not work properly under the following conditions. In this case
select the AWC mode.
❶
When the color temperature of environment surrounding the subject is out of the
control range (e.g. clear sky, or sunset)
2
When the ambient illumination of the subject is dim.
3
If the camera is directed towards a fluorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may
become unstable.
Notes
2. Select a desired mode using the Left and Right buttons depending on the camera purpose.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
• Select ’BLC‘ to adjust the area to be enhanced and
enhancement level.
< WDR > < OFF >
WDR : When there are both bright and dark areas at the same time, this mode
makes both areas distinctive.
• Select ’WDR‘ to adjust the WDR LIMIT and LEVEL.
- LIMIT : Adjust the WDR Sensitivity by selecting
LOW, MIDDLE, or HIGH.
- LEVEL : Adjust the WDR Brightness by controlling
the bar from 1 to 100.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON