6
US
Getting Started
ANALOG
L
L
R
R
R
L
5.1CH OUT
2CH OUT
OUT
OPTICAL
COAXIAL
CENTER
FRONT
SURROUND
SUB WOOFER
DIGITAL(CD)
AC IN
Connecting via ANALOG 2CH OUT jacks
Use an audio connecting cords for this connection. Connect the
ANALOG 2CH OUT L/R jacks to the CD (SACD) input jacks of
your amplifier. Be sure to match the color-coded pin to the
appropriate jacks: white (left) to white and red (right) to red.
Audio connecting cords (Red and White) (supplied)
White (L)
Red (R)
White (L)
Red (R)
To CD (SACD) IN
jacks (L/R)
Stereo amplifier, etc.
Hooking Up the Audio Components
Note
During playback of a Multi-channel Super Audio CD, no signal is
output from the ANALOG 2CH OUT jacks.
About the ANALOG 2CH OUT
When you play a conventional CD or a 2CH Super Audio CD, the
stereo signal is sent to the FRONT, SURROUND, and CENTER/
SUB WOOFER D/A Converters, and each signal is combined
after D/A conversion, then combined signal is output from the
2CH OUT jacks.
Since each digital signal is converted to analog signal by three
converters, this system offers a three-fold improvement in a
signal quality and a root three-fold in noise ratio, and results in
improvement in a signal to noise ratio. Therefore, the high
quality signal is output from the ANALOG 2CH OUT jacks.
However, because of the system, no signal is output from the
ANALOG 2CH OUT jacks during playback of a Multi-channel
Super Audio CD. Similarly, no signal is output from the PHONES
jack during playback of a Multi-channel Super Audio CD.
