background image

Basic Operations

6

Names and Functions of Parts

1

PHONES jack

2

LOW-BOOST knob

Turn to the right to increase the level of the bass.
(Increasing the level of the bass when listening at
high volumes may cause the sound to distort.)

3

HI-BOOST knob

Turn to the right to increase the level of the treble.

4

VOLUME 1 and VOLUME 2 knobs

Turn the VOLUME 1 or VOLUME 2 knob to the
right to increase the volume of the source
connected to the respective input.
If nothing is connected to one of the input
terminals, set the respective knob to the “0”
position. These knobs can also be used to adjust
the mix balance of sound sources connected to
INPUT 1 and INPUT 2.

5

POWER switch (right speaker)

Turn the power of the main speaker ON/OFF.
Indicator lights when the POWER switch is set to
the ON position.
(Before turning the power ON, be sure the
VOLUME 1 and VOLUME 2 knobs are set to the
“0” position.)

6

POWER switch (super woofer)

Turn the power of the super woofer ON/OFF.
Indicator lights when the POWER switch is set to
the ON position.
(Before turning the power ON, be sure the
VOLUME 1 and VOLUME 2 knobs are set to the
“0” position.)

7

HI-CUT knob

Turn the HI-CUT control, depending on the
reproduction frequencies of the speakers.

8

LOW-BOOST knob

Turn to the right to increase the level of the bass.
(Increasing the level of the bass when listening at
high volumes may cause the sound to distort.)

9

LEVEL knob

Turn to the right to increase the volume.

PHONES

LOW-BOOST

0

10

HI-BOOST

0

10

VOLUME 1

0

10

VOLUME 2

0

10

1 2 3 4

POWER

5

Super woofer
(front)

Left main speaker
(front)

Right main speaker
(front)

6

7

8

9

LEVEL

0

10

LOW BOOST

0

10

HI-CUT

80

200Hz

POWER

Summary of Contents for SA-SPC5









Reviews: