4
Getting Started
Unpacking
Check that you received the following items:
• Main speakers (L ch/Rch)
• Super woofer
• Audio connecting cords (3)
Installation
• Do not install the system near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or
shock.
• Good ventilation is essential to prevent internal heat
buildup in the main speakers and super woofer.
Place the speakers in a location with adequate air
circulation. Do not place the speakers on a soft
surface or too close to a wall.
• To obtain a better bass reproduction, we recommend
that you install the super woofer on a solid floor
where resonance is unlikely to occur.
Notes
• Always install the system vertically, keeping a few
centimeters away from the wall.
• Do not place an object on the system or sit on it.
• If the super woofer is installed in the center of a room, the
bass could be extremely weakened. This is due to the
influence of the standing wave of the room. If this
happenes, move the super woofer away from the center of
a room.
Hooking Up the System
Before you get started
• Turn off the power of the unit (pre-amplifier,
personal computer, MIDI sound source) main
speakers to be connected and the super woofer
before making any connection.
• Use the supplied connecting cords. If the cords are
not enough or suitable to make the necessary
connections, you need to purchase some optional
audio connecting cords.
• Be sure to make connections firmly to avoid noise.
Turning the system on
SA-SPC5’s system power switch is on the right main
speaker.
1
Turn the super woofer power switch on.
2
Turn the right main speaker switch on.
You can leave the super woofer power switch on and
turn the entire system on or off by using the right main
speaker power switch.
Getting Started
