Sony RMU-01, Operating Instructions Manual

Page: 13 / 26

13 Using the RMU-01 Setting Tool
6
Click “Use the following IP address”,
and then enter the IP address in the IP
address field.
Make sure not to use an IP address that
is already assigned to another device
on the network.
7
Enter “255 255 255 0” into the Subnet
Mask field.
8
Click “OK” to close the internet
protocol (TCP/IP) properties window.
9
Click “Close” to close the local area
connection properties window.
Software installation
For details on installing procedure, refer to the
printed Operating Instructions.
Starting Up and Exiting the
Software
To start up the software
Select “Start> All Programs> Sony>
Digital Wireless Microphone System>
RMU-01 Setting Tool” to start up the
software.
To exit the software
Click the Close button (×) in the top-right
corner of the window.
Parts Identification
In this section, parts of the main display of this software are explained.
Note
2
Setting button
3
Option button
9 Target TX setting display
6
IP Address setting display
5 MAC address display
4 Name setting display
qa Version display
7 Subnet Mask setting display
1
Search Devices button
0
Remote CH setting display
8
Location setting display