PRS-T2
12
When the CHASSIS ASSY (including ELEMENT INK IN-
DICATOR 6inch) is replaced:
Con
fi
rm the FPL lot number and TFT vender described on the la-
bel of new CHASSIS ASSY (including ELEMENT INK INDICA-
TOR 6inch). Record the con
fi
rmed the FPL lot number and TFT
vender by taking the memo etc..
Procedure:
1. Replace complete MAIN board or CHASSIS ASSY (including
ELEMENT INK INDICATOR 6inch) for new parts, and as-
semble this unit.
2. Con
fi
rm the following data to the service headquarters.
•
WF
fi
le corresponding to the recorded FPL lot number and
TFT vender
•
WF
fi
le translation tool (wwv_parser.exe)
3. Copy the
fi
le and the tool obtained in step 2 to directly under
the C drive of PC (Windows XP or more is recommended).
4. Start the command prompt, and execute the following com-
mands.
“c:\wwv_parser.exe -o c:\lut.bin c:\” + “(
fi
le name of WF
fi
le)”
c:\wwv_parser.exe -o c:\lut.bin c:\V220_C036_60_WQ0303_ED060SC7C1_BTC.wbf
Example of inputting command:
“c:\wwv_parser.exe -o c:\lut.bin c:\”
is invariable.
“wwv_parser.exe” is a name of
provided WF file translation tool.
“lut.bin” is a file converted into the
form that can be stored in the device.
Input the provided
WF file name to
this part.
5. The
“lut.bin”
fi
le is generated to directly under the C drive.
6. Press the [
1
] key to turn the power on.
7. Con
fi
rm the HOME menu was completely displayed, and con-
nect this unit to PC by the USB cable (MICRO B).
8. Con
fi
rm the USB connection screen displayed, and touch the
“Yes”.
Do you want the computer to recognize
this device?
Tap [Yes] to install Reader
TM
for PC or Reader
TM
for Mac
R
application, or transfer content.
Tap[No] to use Reader while charging.
Note: This screen will show whenever connecting with the
USB cable.
OFF
Yes
No
9. The following screen is displayed in this unit, and con
fi
rm the
“READER” drive of this unit is recognized on PC.
This device is correctly recognized by the
computer.
Check completion of the transfer by computer before
detaching USB cable.
10. Make the following folder under the “READER” drive of this
unit.
/testmode/data/
11. Copy the “lut.bin”
fi
le made in step 5 to the “data” folder made
in step 10.
12. Copy the
fi
le for the test mode from PC to directly under the
“READER” drive of this unit.
Note 2:
When the
fi
le for the test mode already exists directly under the
“READER” drive of this unit, the
fi
le for the test mode need not
be newly copied.
13. Remove this unit and USB cable (MICRO B) from PC.
14. Enter the test mode (Refer to “HOW TO ENTER THE TEST
MODE” (page 10)).
15. Touch the “Update Waveform” in the test mode menu, and
con
fi
rm current (unrenewed) LUT version is displayed.
(Example: “00000000112344567789” in the
fi
gure below)
@Test Mode
Version: X.X.X
Target storage: Internal
Test Panal
Update Waveform
IR-LED Level
Drawing with
Points
Update SP1
Parameters
Check 3G Module
TP Coordinate
Check User
History
Test All Key
Switch ADB
Test Battery Life
Fake MoAkey
Version
Confirmation
Reboot (Normal)
Check Battery
Reboot (Recovery)
Set Sleep Timeout
Radio Logcat
Get “traces.txt”
Factory Initialize
Re-fetch 3G
Identifier
Log Extact 2
(Flush)
Reset Device Lock
Power Off
Log Extact 1
Check
Temperature
Write VCOM
WWAN ON
WWAN OFF
Update waveform
Current:
00000000112344567789
Would you like to update?
Yes
No
(Example of displaying current
(unrenewed) LUT version)
16. Touch the “Yes”, it starts rewriting LUT version.
17. After about 10 seconds, screen changes into all white.
18. Press [RESET] button and reboot this unit.
[RESET] button
19. Enter the test mode (Refer to “HOW TO ENTER THE TEST
MODE” (page 10)).
20. Touch the “Update Waveform” in the test mode menu, and
con
fi
rm that the LUT version has been updated.
(Example: “00000000432188779695” in the
fi
gure below)
@Test Mode
Version: X.X.X
Target storage: Internal
Test Panal
Update Waveform
IR-LED Level
Drawing with
Points
Update SP1
Parameters
Check 3G Module
TP Coordinate
Check User
History
Test All Key
Switch ADB
Test Battery Life
Fake MoAkey
Version
Confirmation
Reboot (Normal)
Check Battery
Reboot (Recovery)
Set Sleep Timeout
Radio Logcat
Get “traces.txt”
Factory Initialize
Re-fetch 3G
Identifier
Log Extact 2
(Flush)
Reset Device Lock
Power Off
Log Extact 1
Check
Temperature
Write VCOM
WWAN ON
WWAN OFF
Update waveform
Current:
00000000432188779659
Would you like to update?
Yes
No
(Example of displaying updated LUT version)
