6-4
6-2-2. Service Mode
1) Turn of the main power ON.
2) On the screen after exiting all menu screen’s, press “ESC” on the service remote controller.
3) Press “DISP”.
4) Press “DIG/ANA”.
Overview and purposes
To be used to check the status of the product and to collect the information for failure diagnosis.
The following information to be used for servicing is displayed:
[1] First screen
: Version, HDD information, etc.
[2] Second screen : ATA/ATAPI debug screen (Writer information)
[4] Fourth screen : VR-recording-related error logs
Each screen has sublevel screens.
Note:
After entering any Service mode screen, to shift to another Service mode screen, first quit that Service mode screen then enter another Service mode
screen.
5) Press “ESC”. (Returns to the original screen)
6-2-3. Version Information and Other Information (First screen)
1) Turn of the main power ON.
2) On the screen after exiting all menu screens, press “ESC” on the service remote controller.
3) Press “DISP”.
* Checking the respective software version numbers and other HDD
information.
1
Model name/destination
2
Version of the recorder software
3
Revision No. of the system-control computer software
4
Version No. of the tuner microcomputer
Result of the combination check with system microcomputer
5
Information on the built-in drive
(Model name, version No., model type)
6
Data of the built-in HDD, capacity of the HDD
7
DEVICE information (EMMA type, ES No.)
8
FLASH ROM information
9
Region No.
0
CPRM information (CPRM key No.)
OK
: Appropriate version compared with that of the firmware of
the system control computer.
NG-
: The version of the TUNER microcomputer is older.
Measures to be taken:
• Download the firmware.
1
3
4
5
6
7
9
----
2
VERSION : 1.
**
SYSCON : RELEASE_100
Ver: 1.10034
TUNERCON : 198.000
OK
DRIVE : DVD-RW DVR-L11X
OK
1.00
OK
HDD INT : WDC WD1600AAJS-9
160
HDD USE :
160
DEVICE : E2R-FEx1.1
8
FLASH : 64M
REGION : 2
0
C :
************
HDCP :
DTB H : 455
DTB S : 107
OK
DTB B : 107D
OK
OK
: Appropriate version compared with that of the firmware of
the system control computer.
NG-
: The version of the drive microcomputer is older.
Measures to be taken: Download the firmware.
OK
: The appropriate drive is mounted.
NG
: An inappropriate drive is mounted.
Measures to be taken: Download the firmware.
4) Press “ESC”. (Returns to the original screen)
