000
7. Menu Display and Settings: Menu List
105
Maintenance >Camera Config
Makes settings related to various camcorder operations.
Item
Setting
Description
User Menu with Lock
On/
Off
Selects whether to lock the menu display,
showing the User menu only.
On: Enter an arbitrary passcode number to lock
the menu display. (Only the User menu is
displayed.)
Off: Enter the passcode number entered when
“On” was selected to unlock the menu
display. (When unlocked, the normal menu
list is displayed.)
[Note]
In normal menu display operation, this item is not
displayed.
For details about menu display operation, see
page 86.
RM Common Memory On/
Off
Selects whether to share (On) or not share (Off)
settings between when using a remote control
unit connection and when the camcorder is
operated locally.
RM Rec Start
RM
/Camera/PARA
Selects which of the recording start/stop buttons
are enabled when a remote control unit is
connected,
RM: Remote control unit
Camera: Camcorder
PARA: Both
SET Key on Thumbnail
Pause
/Play
Selects the operation when the MENU knob is
pressed with only one thumbnail selected.
Maintenance >Camera Config
Makes settings related to various camcorder operations.
Item
Setting
Description
ALAC
Auto
/Off
Sets whether to execute ALAC (Auto Lens
Aberration Correction) automatically.
Auto: Execute ALAC automatically when an
ALAC-compatible lens is attached and ALAC
is enabled.
Off: Do not execute.
[Note]
Depending on the aberration correction lens, the
aberration correction function may not be activated
immediately (“ALAC” does not appear on the viewfinder
screen) after turning the power on, even when this
setting is set to Auto. If this occurs, turn the lens zoom
ring and focus ring to the end stop and back, and check
whether the “ALAC” indicator appears on the viewfinder
screen.
Contact a Sony service representative for information about
aberration correction lenses.
Maintenance >Preset White
Makes settings related to white balance preset values.
Item
Setting
Description
Color Temp <P>
1500K to
3200K
to 50000K
Sets the white balance preset value.
Color Temp Balance
<P>
–99 to
±0
to +99
Sets the fine color temperature settings, for use
when a satisfactory image cannot be obtained
using Color Temp<P>.
R Gain <P>
–99 to
±0
to +99
Sets the R gain preset value.
B Gain <P>
–99 to
±0
to +99
Sets the B gain preset value.
AWB Enable <P>
On/
Off
Turns execution of the AWB (auto white balance)
function on/off when the WHITE BAL switch is set
to PRST.
Maintenance >White Filter
Makes settings related to filters.
Item
Setting
Description
ND Filter C.Temp
On/
Off
Turns the function that assigns electrical CC filters
to ND filters on/off.
ND FLT C.Temp<1>
3200K
/4300K/5600K/6300K
Selects the color temperature when electrical CC
filters are assigned to ND filters (filter 1).
ND FLT C.Temp<2-4>
3200K
/4300K/5600K/6300K
Selects the color temperature when electrical CC
filters are assigned to ND filters (filters 2 to 4).
