background image

38

Notes

• During push auto focus operation, Face Priority AF is 

activated even if Face Only AF is currently selected.

• Face detection AF is not available in the following 

cases.

In FULL MF mode

When the FOCUS switch is set to MANUAL 
(excluding during push auto focus operation)

When the recording format is DVCAM

• If you turn the camcorder off while Face Only AF is 

selected, the mode automatically switches to Face 
Priority AF when the camcorder is next turned on.

Hiding face detection frames

You can show/hide face detection frames using 
Display On/Off >Face Detection Frame 

(page 105)

 in the LCD/VF menu.

Focusing on a registered face

During face detection AF operation, you can 
register a face for a subject (person) for focusing 
on that face.
Only one face can be registered. Registering a 
face overwrites the existing registration.
When a face is registered, the detection frame 
changes to a double frame, and the registered face 
icon  

(page 12)

 is displayed.

In face detection AF, the following actions occur 
depending on the combination of registered face 
and face detection AF operating mode.

Face Priority AF (with registered face):

 If 

the camera detects the registered face, the 
camera focuses on that face. If the registered 
face is not detected, normal Face Priority AF 
is activated.

Face Only AF (with registered face):

 If the 

camera detects the registered face, the 
camera focuses on that face. While the 
registered face is not detected, AF is 
temporarily stopped (MF), and the Face Only 
AF mode auto focus paused icon 

 

(page 12)

 is displayed. This mode is effective 

when you want to auto focus on the 
registered person.

Setting the registered face

Move the face selection cursor (orange 
underline) to the face to register using the 

V

/

v

/

B

/

b

 button, and press the SET button or 

SEL/SET dial.

Clearing the registered face

Move the selection cursor to the registered face 
using the 

V

/

v

/

B

/

b

 button, and press the SET 

button or SEL/SET dial.
The registered face is cleared, the face frame 
becomes a single frame, and the registered face 
icon disappears.
When faces are detected with the registered face 
frame not displayed and the face selection cursor 
(orange) displayed, you can clear the registered 
face by pressing the SET button or SEL/SET dial 
twice.

Notes

• Faces may not be detected depending on the recording 

environment, condition of the subject, or the settings.

• You may not be able to get the proper effect, or objects 

other than people’s faces may be detected as a face, in 
some recording environments. In this case, set the face 
detection AF function to Off.

• Registration of the face of the intended individual for 

focusing before shooting is recommended.

• Face registration may not be successful depending on 

hairstyle, facial decoration, or if not directly facing the 
camera. In this case, the face frame may become a 
double frame, but the registered face icon is not 
displayed and the face is not registered.

• If a face has already been registered, clearing the 

existing face and then registering the new face is 
recommended.

• The registered face function is not available when 

Menu Settings >Direct Menu with <SET> 

(page 123)

 

in the System menu is set to On.

Switching face detection AF operation 
using an assignable button

Assign Face Detection AF to an assignable button 

(page 40)

. You can then switch face detection AF 

operation in the order Face Priority AF, Face 
Only AF, and Off each time you press the button.

Setting using the direct menu

You can also set the face detection AF operation 
using the direct men

(page 37)

.

Face selection cursor (orange)

Registered face frame 
(double white frame)

Other faces (gray)

Summary of Contents for PXW-Z280T



























































































































































Reviews: