53
2-8-3. IF-1346 Board
Preparation
1. Remove the outside panel assembly. (Refer to
“
2-2. Outside Panel Assembly
”
.)
2. Remove the CT-287A board. (Refer to “2-3. CT-287A Board”.)
3. Remove the jack assembly. (Refer to “2-4. VC-41 board”.)
4. Remove the inside panel assembly. (Refer to “2-7-1. Inside Panel Assembly”.)
5. Remove the handle assembly. (Refer to “2-8-1. Handle Assembly”.)
Procedure
1. Remove the two precision screws, and then remove the microphone holder assembly.
Microphone holder assembly
Precision screws
(P2.6 x 5)