Sony PXW-Z190T Operating Instructions Manual Download Page 153

Page: 153 / 170

153

Troubleshooting

Power supply

Symptom

Cause

Solution

The camcorder does not
power on.

No battery pack is mounted and no
power is supplied to the DC IN
connector.

Mount a battery pack

(page 21)

or connect to AC

power using an AC adapter

(page 22)

The battery pack is completely
exhausted.

Replace the battery pack with a fully charged one

(page 21)

The power supply cuts
while operating.

The battery pack becomes exhausted.

Replace the battery pack with a fully charged one

(page 21)

The battery pack becomes
exhausted very quickly.

The ambient temperature is very low.

This is due to the battery characteristics and is
not a defect.

The battery pack is inadequately
charged.

Recharge the battery pack

(page 21)

If the battery pack is soon exhausted even after
you charged it fully, it may comes to the end of
its life. Replace it with a new one.

Recording/playback

Symptom

Cause

Solution

Recording does not start
when you press the record
button.

The memory card is write-protected.

Release the write-protection, or replace the card
with a non-protected memory card.

The memory card is full.

Replace the card with one having sufficient
space.

The memory card needs restoration.

Restore the memory card

(page 26)

Audio recording is not
possible.

The audio recording level is set to the
minimum level.

Adjust the audio recording level

(page 35)

The recorded sound is
distorted.

The audio level is too high.

Adjust the audio recording level

(page 35)

The recorded sound has a
high noise level.

The audio level is too low.

Adjust the audio recording level

(page 35)

When an external microphone is selected, also
adjust the INPUT MIC Reference setting under
Audio Input in the Audio menu

(page 99)

Clips cannot be played
back.

The clip is being edited.

An error or warning may not be displayed
depending on the status of the camcorder. This is
not a malfunction.

The clip is being recorded on another
device.

Clips cannot be played back if you have modified
file names or folders, or if the clip is in use on a
computer. This is not a malfunction.

Summary of Contents for PXW-Z190T











































































































































































Search results

Summary of Contents for PXW-Z190T

Reviews:

Related manuals for PXW-Z190T

Brands by name

Popular brands

Sony PXW-Z190T, Operating Instructions Manual

Search results

Summary of Contents for PXW-Z190T

Reviews:

Related manuals for PXW-Z190T

Brands by name

Popular brands