Sony PXW-X500, Service Manual

Page: 92 / 184

2-8. AU-360 Board
Preparation
1. Remove the outside panel assembly. (Refer to “2-2. Outside Panel Assembly” )
2. Remove the bracket (WA) assembly. (Refer to “2-6. Wi-Fi Module/SD-58 Board” )
3. Remove the RE-326 board. (Refer to “2-7. RE-326 Board” )
Procedure
1. Remove the four screws, and disconnect the AU-360 board from the connector (CN2) on the MB-1210 board.
AU-360 board
CN2
(MB-1210 board)
CN101
PSW2 x 5
PSW2 x 5
PSW2 x 5
PSW2 x 5
(a)
(b)
(c)
(d)
Note
When installing the AU-360 board, tighten the screws in the order of (a) to (d).
2. Install the removed parts by reversing the steps of removal.
PXW-X500
2-38