Sony PXW-FS7, Service Manual

Page: 32 / 296

2-4. Service Menu
The unit is provided with the Service menu that is useful for maintenance and adjustment. The menu content is displayed
on the screen.
The Service menu consists of the following menus.
Menu Item Description
Information Information and status of the unit display
Version 1
～
3 Firmware software and FPGA, etc. display
2-4-1. How to Display the Service Menu
• Press the [MENU] button to display the setup menu.
• Turn the [SEL/SET] dial to place the cursor at “Hours Meter” of the System menu.
• Press the [MENU] button while pressing the [SEL/SET] dial and the [ASSIGN 1] button simultaneously.
The Service menu is added to the setup menu.
Tip
The Service menu is kept in the setup menu unless the power is turned off, after add the Service menu.
It is able to switch on/off the Service menu display by pressing the [MENU] button.
The Service menu is deleted from the setup menu when the power is turned off.
2-4-2. Service Menu List
Refer to “2-4-3. Details of Each Menu” for details of each items.
Menu Item Submenu Item Choice
(Default Setting) Function
Factory Reset Reset Execute/Cancel
(Cancel) Reset to the factory setting (for Service menu)
Information Serial Number – Displays the serial number of the unit
Imager Temp. – Displays the temperature of the image sensor
Main Board Temp – Displays the internal temperature (around
main board)
Log Dump Execute/Cancel
(Cancel) Outputs log of this unit
Version 1 Package – Displays firmware version
IC2300 (AVP-25 board)
IC2400 (DPR-365 board)
IC2400 (DPR-365 board)
IC0100 (DPR-365 board)
IC1900 (DPR-365 board) – Displays each IC version
Version 2 IC1100 (DPR-365 board)
IC0201 (VIF-58 board) –
Version 3 IC3102 (AVP-25 board)
IC2803 (DPR-365 board)
IC631 (KY-739 board) –
2-4-3. Details of Each Menu
Factory Reset Menu
The Factory Reset menu is used to restore the factory settings (default settings) of the Service menu.
PXW-FS7/PXW-FS7K
2-4