Sony PXW-FS5, Operating Manual

Page: 109 / 200

109
Re
cor
d
in
g
z
Tips
• Setting both memories to the same setting doubles the color correction effect.
• The settings of [COLOR CORRECTION] will be retained even if the power is turned off. However, if
you want to correct colors that may change according to time of the day, weather, location, etc., it is
recommended that you set [COLOR CORRECTION] again prior to recording.
• If you change the white balance value or the settings of [WB SHIFT], [SATURATION] or [COLOR
PHASE] of the picture profile, the settings of [PHASE RANGE] and [PHASE] of the selected memory
will change. When you change the white balance value or the settings of the above picture profile items
after you have set [PHASE RANGE] and [PHASE], check the settings of [COLOR CORRECTION] prior
to recording.
• When the white balance is set in full auto mode, the white balance value automatically varies according to
the lighting conditions of your recording environment. Manual white balance adjustment is recommended
when you use [COLOR CORRECTION].
WB SHIFT
To set items for the white balance shift.
Items you can adjust differ depending on the filter type.
MEMORY1
REVISION Corrects colors in Memory 1.
[PHASE]: Corrects the phase of the color in Memory 1.
–15 to +15 (0 for no correction.)
[SATURATION]: Corrects the saturation of the color in Memory 1.
–15 to +15 (0 for no correction.)
MEMORY2 COLOR Sets colors stored in Memory 2.
See [MEMORY1 COLOR] for description and settings.
MEMORY2
REVISION Corrects colors in Memory 2.
See [MEMORY1 REVISION] for description and settings.
Item Description and settings
[FILTER TYPE] Selects a color filter type for the white balance shift.
[LB-CC] : Film type (color conversion and correction)
[R-B] : Video type (correction of R and B levels)
[LB[COLOR TEMP]] Sets a color temperature offset value.
–9 (bluish) to +9 (reddish)
[CC[MG/GR]] Sets a color correct offset value.
–9 (greenish) to +9 (magentish)
[R GAIN] Sets an R level.
–9 (low R level) to +9 (high R level)
[B GAIN] Sets a B level.
–9 (low B level) to +9 (high B level)
Item Description and settings
Continued ,