Chapter
2
Chapt
er
2
Names
and
F
u
n
c
tion
s
of
P
a
rt
s
6
Front Panel
Names and Functions of
Parts
Front Panel
a
On/Standby button and indicator
Switches the unit between on and standby. When the main
power switch on the rear panel is turned on, the unit is in
standby mode and the indicator is lit red. When the On/
Standby button is pressed while in standby mode, the unit
is turned on and the indicator is lit green. The indicator is
off when the main power switch is turned off.
b
SYSTEM indicator
Displays the status of the unit.
Green:
Operating normally
Green (flashing once per second):
Starting up
Orange (flashing once per second):
Warning message
was issued.
Red (high-speed flashing four times per second):
Serious error has occurred.
Purple (flashing once per second):
Network reset is in
progress.
c
ACCESS indicator
Displays the access status of storage.
Off:
Not being accessed
Blue:
Accessing
Blue (flashing):
Formatting or deleting files
d
Network reset switch
Resets the IP address and network settings to their default
values. Insert and hold the end of a paper clip or other thin
object into the hole to operate the internal switch and then
start the unit. The SYSTEM indicator will begin flashing
purple.
1
On/Standby button and indicator
2
SYSTEM indicator
3
ACCESS indicator
4
Network reset switch
