1) GB/RU
PSP-E1008 4-294-406-61(1) GB/RU
9
GB
W
a
rning and caution
Precautions
er of the
.
ries
e instructions
odification
nfigurations,
anty and may
angerous,
iversal
directly to
Moisture condensation
If the PSP
®
system or Universal Media Disc is brought directly
from a cold location to a warm one, moisture may condense on
the lens inside the system or on the Universal Media Disc. Should
this occur, the system may not operate properly. In this case,
remove the Universal Media Disc
and turn off and unplug the
system. Do not put the Universal Media Disc
back in until the
moisture evaporates (this may take several hours). If the system
still does not operate properly, contact the appropriate PSP
®
customer service helpline which can be found within every PSP
®
format software manual.
Universal Media Disc
handling
Do not touch the opening on the rear of the disc (recorded
surface of the disc) with your fingers.
Do not allow dust, sand, foreign objects or other types of dirt to
get on the disc.
If the Universal Media Disc
becomes dirty, gently wipe the
exterior and recorded surfaces of the Universal Media Disc
using a soft cloth. Do not use solvents or other chemicals.
Do not use a Universal Media Disc
that is cracked or warped or
has been repaired. The Universal Media Disc
may break inside
the PSP
®
system, leading to injury or malfunction.
Handling and care of exterior surfaces
Follow the guidelines listed below to help avoid deterioration or
discolouration of the PSP
®
system.
Do not use solvents or other chemicals to clean the exterior
surface.
Do not allow the system to remain in direct contact with rubber
or vinyl products for an extended period of time.
Do not use a chemically-treated cleaning cloth to wipe off the
system.
Before using the analog stick
Do not attempt to remove the analog stick from the system
front, as doing so will damage the system and may result in
injury.
For best results, go to
(Settings)
(System Settings),
and then with the [System Information] screen displayed, rotate
the analog stick in a circular motion to adjust the analog stick's
range of movement.
Cleaning
For safety reasons, unplug the AC adaptor from the electrical
outlet and disconnect any other cables before cleaning the system.
Cleaning the exterior surface and LCD screen
Wipe gently with a soft cloth.
Cleaning the connectors
If the connectors on the PSP
®
system or on the USB cable become
dirty, signals may not be sent or received properly. Also, if the
connector on the headphones becomes dirty, you may experience
noise or interruptions in sound. Wipe the connectors with a dry,
soft cloth to keep in clean condition.
Cases and coverings
When placing the PSP
®
system in a commercially available case,
turn off the power or put the system in sleep mode. Do not use the
system while it is in the case. Leaving the system on, or using it
while in a case or covering may cause overheating or may damage
the system.
