PRS-T1
2
NOTE THE EACH BOARDS REPAIRING
The mount parts on each boards installed in this set cannot ex-
change with single. When the each boards are damaged, exchange
the entire mounted board.
NOTE OF REPLACING THE COMPLETE MAIN BOARD
OR CHASSIS ASSY
Please do the following work when you exchange complete MAIN
board or CHASSIS ASSY.
Note:
INK INDICATOR 6inch ELEMENT is included in CHASSIS
ASSY.
• REWRITING
THE
LUT:
Refer to “9. Update Waveform” on page 9.
• Write
VCOM:
Refer to “14. Write VCOM” on page 11.
ABOUT THE LEAD WIRE OF BATTERY ASSY (BAT1)
Con
fi
rm the operation after pressing the button of the main unit
bottom without fail when soldering the BATTERY ASSY (BAT1)
to the MAIN board.
MAIN board
soldering
RESET button
battery assy (BAT1)
NOTE OF REPLACING THE WLAN ANTENNA
Please do the following work when you exchange WLAN AN-
TENNA.
Manually setting a Wi-Fi connection
You can set up a Wi-Fi network connection manually by inputting the required information for
connection. Make sure to turn on [Wi-Fi] and tap [Wi-Fi Settings] on the [Wireless Network
Settings] screen. Alternatively, you can turn on [Wi-Fi] by tapping the status bar and tapping [Wi-
Fi Settings].
1.
Tap [Add Wi-Fi Network].
2.
Tap [Manual Registration].
3.
Tap the [SSID] input area and type in using the on-screen keyboard.
4.
Tap the [Security Method] menu (the default value is [Open]), and then tap the supported
security type.
5.
Tap the [Wachtwoord] input area and type in your password using the on-screen keyboard,
and then tap [Gereed]
[Save].
6.
Tap the saved network SSID in the [Wi-Fi Networks] list on the [Wi-Fi Settings] screen.
7.
If prompted for a password, tap the input area and type in the password using the on-screen
keyboard.
8.
Tap [Connect].
The Reader connects to the Wi-Fi network.
The Wi-Fi connection status is displayed in the status bar.
System Requirements
The Reader software will work with the following operating systems.
Operating System
Details
Microsoft Windows 7 (32/64-
bit)
Windows 7 Starter
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Microsoft Windows Vista
(32/64-bit)
Windows Vista Home Basic with Service Pack 2 or later
Windows Vista Home Premium with Service Pack 2 or later
Windows Vista Business with Service Pack 2 or later
Windows Vista Ultimate with Service Pack 2 or later
Microsoft Windows XP (32-
bit only)
Windows XP Home Edition with Service Pack 3 or later
Windows XP Professional with Service Pack 3 or later
Windows XP Media Center Edition 2004 & 2005 with Service
Pack 3 or later
Mac OS X 10.7 (64-bit only)
Mac OS X version 10.7 or later
Mac OS X 10.6 (32/64-bit)
Mac OS X version 10.6.6
Mac OS X 10.5 (32-bit only)
Mac OS X version 10.5.8
The Reader software also requires at minimum the following computing environment.
Requirement
Details
CPU
1 GHz Intel processor
RAM
512 MB
Free space on hard disc 250 MB or more*
Screen
1,024 x 768 display resolution with 24-bit color
Network
Broadband internet connection
* Depending on the content amount, more space may be required.
Note
The Reader software is not supported with the following:
An operating system other than those listed above
A personally built computer or operating system
A multi-boot environment
A multi-monitor environment
SECTION 1
SERVICING NOTES
