Sony POWER TRILOGIC SLV-L49 MX Operating Instructions Manual Download Page 55

Page: 55 / 80

Additional Operations

Press DIAL TIMER.

“STOP” and the recording stop time appear alternately in the display
window.

Turn DIAL TIMER to set the recording stop time.

The time changes in 15 minute intervals.

Press DIAL TIMER.

The channel appears in the display window.

Turn DIAL TIMER to set the channel.

To record from a source connected to the LINE-1 IN or LINE-2 IN jacks,
press INPUT SELECT to display “L1” or “L2”.

Press DIAL TIMER to complete the setting.

“OK” appears in the display window for about five seconds.

The

indicator appears in the display window and the VCR stands by

for recording. When using a cable box, leave it on.

continued

VIDEO APC

Summary of Contents for POWER TRILOGIC SLV-L49 MX

















































































Search results

Summary of Contents for POWER TRILOGIC SLV-L49 MX

Reviews:

Related manuals for POWER TRILOGIC SLV-L49 MX

Brands by name

Popular brands

Sony POWER TRILOGIC SLV-L49 MX, Operating Instructions Manual

Search results

Summary of Contents for POWER TRILOGIC SLV-L49 MX

Reviews:

Related manuals for POWER TRILOGIC SLV-L49 MX

Brands by name

Popular brands