26
Getting Started
Setting the clock (continued)
3
Press
>
/
.
to highlight AUTO, then press
OK.
4
Press
>
/
.
to highlight FULL AUTO, then
press OK.
5
Press
>
/
.
to highlight YES, then press OK.
6
Press MENU to exit the menu.
7
To activate the Auto Clock Set function, turn off the VCR.
The VCR automatically sets the clock by searching for the SETV
broadcast that carries time signals and sets Daylight Saving Time (if
applicable).
If your clock is set to the wrong Daylight Saving Time, you can
adjust these settings without turning off the Auto Clock Set feature
(page 27).
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Notes
• The clock cannot be set automatically if you do not receive SETV broadcast that
carries time signals in your area. If so, set the clock manually (page 29).
• Depending on the channels allotted to SETV in your area, setting the clock
automatically may take up to about 30 minutes. If nothing happens even after you
wait about 30 minutes after turning off the VCR, turn the VCR on and then off
again. If the clock is not set even after about another 30 minutes, set the clock
manually (page 29).
OK
PLAY
OK
PLAY
OK
PLAY
SELECT
SET
QUIT
:
:
:
AUTO CLOCK SET
YES
O K
MENU
n
n
N
RETURN
FULL AUTO
CLOCK SET CH
DAYLIGHT SAVING
SELECT
SET
QUIT
:
:
:
AUTO CLOCK SET
YES
NO
O K
MENU
n
n
N
RETURN
FULL AUTO
CLOCK SET CH
DAYLIGHT SAVING
MENU
