Sony PMW400K, Operating Instructions Manual, Page: 83 / 212

Using Wi-Fi Connection 83
Ch
apt
er 4
S
hoo
tin
g
2
Set “MAINTENANCE” > “Wi-Fi
Setting” > “Wi-Fi Remote” to “On” in
the setup menu.
Device settings
Set the smartphone, tablet, PC, etc., to be used as
the Wi-Fi remote commander.
1
Make a Wi-Fi connection between the
device and camcorder
(page 79) .
2
Launch the browser and input http://
<camcorder’s IP address>/rm.html in
the address bar.
Example: When the IP address is
192.168.1.10, input http://192.168.1.10/
rm.html in the address bar.
The Wi-Fi remote commander will appear on
the device screen when the Wi-Fi connection
is established.
Thereafter operate the camcorder as shown
on the screen of the Wi-Fi connected device.
The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• Depending on the device, the Wi-Fi remote
commander may not appear properly on the device’s
screen even though you input http://<camcorder’s IP
address>/rm.html in the address bar. In this case, input
“rms.html” for a smartphone or “rmt.html” for a tablet
at the end of the address to display the Wi-Fi remote
commander properly.
• The Wi-Fi remote commander on the device’s screen
may no longer match the actual status of the camcorder
in the following cases. When this happens, refresh the
browser on the device.
- when the camcorder is restarted while the Wi-Fi
connection is established
- when the camcorder is controlled directly while the
Wi-Fi connection is established
- when the device is reconnected
- when you operate forward/backward on the device’s
browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote
commander may not work properly.
• Your smartphone/tablet may not be compatible with
the ad hoc mode. For details, refer to the operating
instructions supplied with the smartphone/tablet.
• When using the Wi-Fi remote commander by
connecting the CBK-WA101 Wireless Adapter, set the
camcorder first, then connect the CBK-WA101.
Compatible devices
The following devices, using the specified
versions or higher, can be used as Wi-Fi remote
commanders.
Device OS Browser
PC Windows 7 Internet Explorer
8 or Internet
Explorer 9
Mac OS 10.7.4 Safari 5.1.6
Smartphone Android 2.3.3 Standard browser
iOS 5.1.1 Safari
Tablet Android 4.0.3 Standard browser
iOS 5.1.1 Safari