Using Wi-Fi Connection
79
Ch
apt
er 4
S
hoo
tin
g
Connecting an optional CBK-WA01 Wi-Fi
Adapter or IFU-WLM3 USB Wireless LAN
Module to this camcorder allows a Wi-Fi
connection between a computer and the
camcorder.
You can also connect the camcorder and computer
via Wi-Fi by using the optional CBK-WA101
Wireless Adapter. For details on connection and
operation of the CBK-WA101, refer to the Operating
Instructions supplied with the CBK-WA101.
Making a Wi-Fi connection between a computer
and the camcorder enables you to do the
following.
• You can transfer planning metadata and other
files between a computer and this camcorder.
• You can also use the Live Logging function to
add shot marks to the video currently being
shot.
Note
Check the firmware version of your camcorder to make
sure that the camcorder supports the Wi-Fi adapter.
For details, contact your Sony dealer or your Sony
service representative.
For details about attaching the CBK-WA01, refer
to the Operating Instructions or Installation
Manual of the CBK-WA01.
Open the cover of the external device connector,
then connect the IFU-WLM3.
Notes
• The IFU-WLM3 USB Wireless LAN Module (sold
separately) may not be available in some countries/
regions.
• Attach/remove the IFU-WLM3 after the camcorder is
turned off.
• An i.LINK connection and USB wireless LAN module
cannot be used at the same time. When using a wireless
connection with an IFU-WLM3 inserted directly into
the external device connector, do not connect a device
to the i.LINK connector.
• If you use a wireless device near the camcorder, the
camcorder may not work correctly. Turn the wireless
device off near the camcorder.
Two types of Wi-Fi connections are available. In
“ad-hoc mode”, you can make a peer-to-peer Wi-
Fi connection between a computer and
camcorder. In “infrastructure mode”, you can
make Wi-Fi connections between a computer and
multiple camcorders via a wireless LAN access
point (building a LAN).
To make a network setting
Change settings under “MAINTENANCE” >
“Network Setting” in the setup menu as required.
a) The IP address determined by DHCP server is
displayed here.
When you have changed a setting
Set the “Set” item to “Execute.” When a
confirmation message appears, turn the MENU
knob to select “Execute” and press the knob.
To make a connection in ad hoc mode
1
Refer to “Settings on the Computer”
under “Making a Wi-Fi Connection to
Your Computer (Ad hoc Mode)” in the
Operating Instructions supplied with
Using Wi-Fi Connection
Fixing the CBK-WA01
Connecting the IFU-WLM3
Making a Wi-Fi Connection
Item
Setting
DHCP
Setting that specifies whether to
acquire the IP address
automatically from a DHCP server
Enabled:
Acquire automatically.
Disabled:
Do not acquire
automatically (factory default
setting).
IP Address
IP address
a)
(factory default
setting: 192.168.1.10)
Subnet Mask Subnet mask (factory default
setting: 255.255.255.0)
Default
Gateway
Default gateway (factory default
setting: 0.0.0.0)
User Name
User name for log-in (factory
default setting: admin)
Password
Password for log-in (factory default
setting: model name “pmw-400”)
Summary of Contents for PMW400K
Page 212: ......