Setup Menu List
105
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
Unlock All Clips
Execute/Cancel
Select “Execute” to remove protection from all clips. (UDF
only)
Index Picture Pos
0sec to 10sec (
0sec
)
Set the image for viewing thumbnails. This selects the time
difference from the start of the clip.
Find Mode
Clip
/ Rec Start
Set the action for when you press the PREV button/NEXT
button. (UDF only)
Clip: Move to the start of the current clip/next clip. (Pressing
the PREV button from the start of a clip will move to the
start of the previous clip.)
Rec Start: Move to the previous Rec Start Essence Mark/the
next Rec Start Essence Mark.
Copy All
2)
Setting for
collective copy of
clips and/or
General files
Clips
To copy all clips on an SxS memory card to the other.
General Files
To copy all files in the General folder on an SxS memory card
to the other.
Clips&General
To copy all clips and files in the General folder on an SxS
memory card to the other.
Format Media
Formatting SxS
memory cards
Media(A)
Execute / Cancel
Select “Execute” to format the SxS memory card in slot A
with the selected file system (UDF/FAT).
Media(B)
Execute / Cancel
Select “Execute” to format the SxS memory card in slot B
with the selected file system (UDF/FAT).
Plan.Metadata
Setting planning
metadata
Load/Slot(A) or Load/Slot(B)
Execute / Cancel
To load planning metadata from the SxS memory card in slot
A or B.
Selecting “Execute” displays the list of the planning metadata
files stored on the SxS memory card in slot A or B. Specify a
file, select “Load” then “Execute” for loading.
Notes
• The file list displays up to 64 files. Even if the total number
of planning metadata files is 64 or less, all of the planning
metadata files may not appear if the directory where they
are located in the SxS memory card (General/Sony/
Planning) contains 512 or more files.
• After you start loading, do not remove the SxS memory
card until the completion message is displayed.
Load/USB
(in UDF mode only)
Execute/Cancel
Loads planning metadata from the USB flash drive connected
to the USB connector (type A).
Select “Execute” to show the list of the planning metadata
files stored in the USB flash drive and select a file to be
loaded.
OTHERS
Menu items
Subitems and setting values
Contents
Summary of Contents for PMW300K1
Page 151: ......