Sony PMW-300K2, Operating Instructions Manual, Page: 29 / 152

Adjusting the Grip (PMW-300K1 only) / Using the IR Remote Commander 29
P
repa
ra
ti
ons
The grip rotates approx. 120 degrees to support a
variety of shooting styles.
Holding the RELEASE button pressed, slowly
rotate the grip.
Click positions are provided at each 15 degrees.
Release the RELEASE button at the desired click
position to lock the grip.
Before use
Before you use the supplied IR Remote
Commander for the first time, pull out the
insulation sheet from the battery holder.
A CR2025 lithium battery is set in the holder at
the factory.
To use the IR Remote Commander
For controlling the camcorder from the IR
Remote Commander, activate the remote control
function of the camcorder after turning the power
on.
Activating/deactivating the remote control
function can be achieved using the Setup menu or
an assignable button.
To activate using the menu
Press the MENU button to set the camcorder to
Menu mode, select the OTHERS menu
(page
100) and set “IR Remote” to “On.”
To activate using an assignable button
Assigning “IR Remote” to one of the assignable
buttons
(page 49) permits you to activate/
deactivate the remote control function by
pressing the button.
Note
To avoid malfunctions, the remote control function is
automatically deactivated when the camcorder is turned
off. Activate the function each time when required after
you turn the camcorder on.
Adjusting the Grip
(PMW-300K1 only)
RELEASE
RELEASE button
Grip
Using the IR Remote
Commander
Insulation sheet