Sony PMW-300K2, Operating Instructions Manual, Page: 26 / 152

Adjusting the Lens 26
P
repa
ra
ti
ons
Notes
• When another lens is not immediately attached,
attach the supplied lens mount cap and secure it
by turning the lens mount lever downward.
• When a non-exclusive lens is mounted for the
first time, it may take about 20 seconds to start
up the camcorder.
Attaching the lens supplied with the
PMW-300K1
To attach the supplied lens, proceed as follows:
The optional Sony 1/2-inch type EX mount lens
can also be mounted in the same manner.
1
Align the alignment pin of the lens with
the recess at the top of the mount section
of the camcorder and set the lens in
place.
2
Turn the lens mount lever downward.
Attaching the lens supplied with the
PMW-300K2
Use the lens mount adapter (supplied with the
PMW-300K2).
1
Attach the lens mount adapter to the
camcorder.
1
Align the alignment pin of the lens mount
adapter with the recess at the top of the
mount section and set the adapter in
place.
2
Turn the lens mount lever of the
camcorder downward. (Keep the lens
mount lever of the lens mount adapter in
the upper position.)
2
Attach the lens.
1 Align the alignment pin of the lens with
the recess of the lens mount adapter and
set the lens in place.
2
Turn the lens mount lever of the lens
mount adapter downward.
To detach the lens, reverse the above procedure.
Lens mount adapter
(supplied with the PMW-300K2)