Audio
The PMW-100 is equipped with two XLR connectors,
which are for professional microphones such
as the ECM - MS2/680S/678/673 and wireless
microphone systems such as the UWP-V1/V2. By
combining the built-in stereo microphone with
external microphone input, you can record up
to four channels of 24-bit 48-kHz high-quality
audio in MPEG HD422 50-Mbps mode.
High-quality Audio
Interfaces
The SDI connector allows the camcorder to
interface with other professional products, and
supports down-conversion from HD to SD signals.
A domestic-use TV can be used as a monitor with
the HDMI connector. The i.LINK
® 1
connector can be
used for HDV when SP 1440 (FAT) mode is selected,
and for DV when DVCAM (FAT) mode is selected.
1
i.LINK is a Sony trademark used only to designate that a
product is equipped with an IEEE 1394 connector. Not all
products with an i.LINK connector may communicate
with each other. Please refer to the documentation that
comes with any device having an i.LINK connector for
information on compatibility, operating conditions and
proper connection
HD/SD-SDI, HDMI, and i.LINK
The PMW-100 comes equipped with Timecode
Input/Output and Genlock Input connectors.
These allow you to synchronize the timecode
and video with other cameras, enabling
easier multi- camera productions.
Timecode IN/OUT, and Genlock
The PMW-10 0 can be connected directly
with a PC using the USB inter face. Even
without a memor y card reader/writer, you
can easily ingest shot files from the PMW-100
to your PC.
USB2.0 (Device)
Gain (L/M/H)
Shutter (On/Off)
Zoom/Focus Ring
One Push Auto Focus
Focus (Auto/Manual)
Zebra
Peaking
Assignable Button (x4)
Zoom/Focus Select Switch
Exposure Control Dial
(Push Trigger)
Menu Control
Audio Input Select /
Level Control
Picture Profile
One Push White Balance
White (Preset/A/B)
Full Auto
Headphone Jack
USB (Device)
i.LINK (HDV/DV)
Input/Output
A/V Output
SDI Output
TC Input/Output
Genlock Input /
Video Output
XLR (3-pin) Input (x2)
HDMI Output
