Sony PMC-D305 Page 36 Operating Instructions Manual Download

Page: 36 / 40

Additional Information

Tape Player

Remedy

• Close the cassette compartment securely.

• Make sure the safety tab on the cassette is in

place.

• Press

on the TAPE section to switch the

function of the player to “TAPE”.

• Clean the erasing heads (see page 38.)

• Make sure the tape is inserted properly.
• Make sure the safety tab of the cassette is in

place.

• Clean the heads, pinch rollers and capstans

(See page 38).

• Demagnetize the heads using a demagnetizer

(see page 38).

• The tape player can be paused during recording

only.

• The TYPE II (high position) or TYPE IV (metal)

tape is being used. Use TYPE I (normal) tape
only.

• Make sure the time on the clock is correct.
• Check to see if the AC power had been cut off.
• Make sure the tape has not wound to the end.
• Make sure the

(clock) indication is displayed.

Symptom

The tape does not move when you
press an operation button.

The

button does not

function/The tape does not play.

The tape does not erase completely.

The tape does not record.

The audio is weak/The audio
quality is poor.

The tape player cannot be paused
during playback.

The sound is distorted.

The timer does not operate.

Timer

Troubleshooting

(continued)

Summary of Contents for PMC-D305









































Search results

Summary of Contents for PMC-D305

Reviews:

Related manuals for PMC-D305

Brands by name

Popular brands

Sony PMC-D305, Operating Instructions Manual

Search results

Summary of Contents for PMC-D305

Reviews:

Related manuals for PMC-D305

Brands by name

Popular brands