Sony PFM-32C1, Service Manual

Page: 41 / 100

3-3
PFM-32C1/32C1E
Service Mode
General
Fan Status
Fan Control
: Auto
Ref Voltage : 8.5[V]
F/B Voltage : 8.5[V]
Drive Data 2B5F
P/S Temp : 43[ d C]
Center Temp : 43[ d C] (1)
I/O Block Temp : 43[
d
C]
Left Temp : 43[ d C]
Service Mode
General
Fan Status
Fan Control
: Auto
Ref Voltage : 8.5[V]
F/B Voltage : 8.5[V]
Drive Data 2B5F
P/S Temp : 43[ d C]
Center Temp : 43[ d C]
I/O Block Temp : 43[ d C] (1)
Left Temp : 43[
d
C]
5. Detecting temperature increase at the left side
of the PDP panel and shutting it down
(1) Left Temp : The temperature that is measured by the
S board installed in the vicinity of the fan
(large), is displayed. If temperature
exceeds 67 d C, the Standby indicator
flashes at the interval of 0.4 seconds
continuously. If temperature exceeds
72
d
C, the shutting-down is activated.
3. Detecting temperature increase at the center
of the top of the PDP panel and shutting it
down
(1) Center Temp : The temperature that is measured by
the S board installed in the top of the
power supply board, is displayed. If
temperature exceeds 69
d C, the Standby
indicator flashes at the interval of 0.4
seconds continuously. If temperature
exceeds 74
d
C, the shutting-down is
activated.
4. Detecting temperature increase at the I/O
block side of the top of the PDP panel and
shutting it down
(1) I/O Block Temp : The temperature that is measured
by the S board installed in the top
of the Q block assembly, is dis-
played. If temperature exceeds
61
d C, the Standby indicator flashes
at the interval of 0.4 seconds
continuously. If temperature
exceeds 66
d
C, the shutting-down is
activated.
Service Mode
General
Fan Status
Fan Control
: Auto
Ref Voltage : 8.5[V]
F/B Voltage : 8.5[V]
Drive Data 2B5F
P/S Temp : 43[ d C]
Center Temp : 43[ d C]
I/O Block Temp : 43[ d C]
Left Temp : 43[ d C] (1)