23
4
Select the audio format you want to import from the Format
drop-down list.
5
To import data while converting it into the ATRAC3 format,
select the recording bit rate (see page 19) from the Bit Rate
drop-down list.
Note
When you select “Without External Device/Media” from “Set the default
External Device/Media” in step 2, you cannot change the recording bit rate.
6
In the File Tree view, click the folder containing the audio file
you want to import.
The audio files in the selected folder are listed in the File List view.
7
Click to select an audio file you want to import from the File
List view.
8
Click to select the desired Playlist on the right side of the
window, and then click
(Import).
The audio file you selected in step 7 can be imported into the Playlist.
Based on the setting made in step 1, the file is imported in its original
format or converted into the ATRAC3 format.
Notes
• The original MP3/WAV files imported are referenced to by the OpenMG Jukebox
when playing back or checking-out the data. Therefore, to prevent moving or
deleting the files, copy them to a specific folder on the hard disk before importing
them to OpenMG Jukebox.
If the original file is stored on removable media and the source media is removed,
the following messages are displayed when try to playback or check-out the data.
– For playback: “Cannot play selected song. The song file not found.”
– For check-out: “Detected song(s) which cannot be checked-out.”
• When the original file is on a network, the same messages are displayed when your
computer is not connected to the network.
• When you delete an audio file, note that the original MP3/WAV is also deleted
when you select “Delete the song file from the computer.”
Importing audio files into your computer
