DISASSEMBLY
DISASSEMBLY
– 23 –
ql
LEX-48 BOARD
Removal procedure
1
LCD unit, LCD chassis assy,
and others.
LEX-48 board
LEX-48 board
4
3
3
1
Remove the
three screws.
4
Disengage the three
detents, remove the
LEX-48 board, and remove
the Flexible flat cable (LED).
3
Disengage the fourteen
detents, and remove the
two Ground plates (Lower),
one Ground plate (Upper),
LCD unit, LCD chassis
assy, and others.
Ground plate
(Upper)
Ground plate
(Lower)
Ground plate
(Lower)
Detents
Precautions during installation.
When performing the air-blowing
on the acrylic panel, perform it
starting from center toward
outside.
Flexible flat cable (LED)
Flexible flat cable
(LED)
+PS (3 X 6)
7-682-647-01
Gold
Give folding to flexible flat board
Detents
3
3
2
Aluminum tape
(W600G/W700G)
2
Aluminum tape
(W700G)
2
Peel off the aluminum tape.
(W600G/W700G)
19
