Sony PCV-RX770 Computer User Guide (primary manual) System Reference Manual Download Page 40

Page: 40 / 96

VAIO Digital Studio System Reference Manual

Removing a PCI Add-in Card

Remove the side panel (see

“Removing the Side Panel”

on page 24).

Disconnect any cables attached to the add-in card you want to
remove.

Remove the screw that secures the add-in card to the chassis.

Remove the add-in card from the PCI slot and store the card in an
anti-static wrapper for future use.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut down
the computer, and unplug the power cord.

✍

Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.

Summary of Contents for PCV-RX770 Computer User Guide (primary manual)

































































































Search results

Summary of Contents for PCV-RX770 Computer User Guide (primary manual)

Reviews:

Related manuals for PCV-RX770 Computer User Guide (primary manual)

Brands by name

Popular brands

Sony PCV-RX770 Computer User Guide (primary manual), System Reference Manual

Search results

Summary of Contents for PCV-RX770 Computer User Guide (primary manual)

Reviews:

Related manuals for PCV-RX770 Computer User Guide (primary manual)

Brands by name

Popular brands