Sony PCV-RX770 Computer User Guide (primary manual) System Reference Manual Download Page 15

Page: 15 / 96

Chapter 1
Identifying Components

The following sections identify and describe each component that is
visible from the exterior of the VAIO Digital Studio™ computer. For
details on the hardware confuguration of your system, see the online
specifications sheet.

To view this online information:

Click

Start

, then click

Help and Support

Click

VAIO User Guide

, then click the

Welcome

link.

Click the link in the text, “Click here to view your computer’s
hardware specifications and software information.”

Summary of Contents for PCV-RX770 Computer User Guide (primary manual)

































































































Search results

Summary of Contents for PCV-RX770 Computer User Guide (primary manual)

Reviews:

Related manuals for PCV-RX770 Computer User Guide (primary manual)

Brands by name

Popular brands

Sony PCV-RX770 Computer User Guide (primary manual), System Reference Manual

Search results

Summary of Contents for PCV-RX770 Computer User Guide (primary manual)

Reviews:

Related manuals for PCV-RX770 Computer User Guide (primary manual)

Brands by name

Popular brands