Sony PCV-RX540 System Reference Manual Download

Page: 42 / 92

VAIO Digital Studio System Reference Manual

Installing an Add-On AGP Card

Your computer has one open AGP expansion slot. This slot enables you to
install an AGP card to enhance your system’s graphics capabilities. The
length of the AGP card should not exceed 9.05 inches.

Remove the side cover (see

“Removing the Side Cover”

on page 24).

Remove the slot cover from the AGP slot (see

“Removing a Slot

Cover”

on page 40).

Press down on the end latch (see diagram) before inserting the AGP
card.

Firmly insert the AGP card into the slot.

✍

Installing an AGP card disables the internal graphics. Your system supports AGP 4X
enabled graphics cards.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut down
the computer, and unplug the power cord.

Press down on latch

before inserting card

Summary of Contents for PCV-RX540





























































































Search results

Summary of Contents for PCV-RX540

Reviews:

Related manuals for PCV-RX540

Brands by name

Popular brands

Sony PCV-RX540, System Reference Manual

Search results

Summary of Contents for PCV-RX540

Reviews:

Related manuals for PCV-RX540

Brands by name

Popular brands