Sony PCV-RX402 Software Manual Download

Page: 77 / 92

Sony V

desktop software guide

Managing drivers

Checking the driver installation

When the computer restarts, check that the device is working properly.

To verify the driver’s installation, proceed as follows:

From the

Start

menu, click

Control Panel

The

Control Panel

window appears.

Click on the

Printers and Other Hardware

icon.

Click the

System

icon.

The

System Properties

dialog box appears.

Click the

Hardware

tab, then click

Device Manager

The

Device Manager

window appears.

Double-click the option corresponding to the device you installed, then double-click your device.
The

Properties

dialog box appears.

Make sure that the

This device is working properly

message is displayed under

Device status

Click

Close all the opened windows, your device is ready for use.

The device is not working properly in the following cases:

❑

Your device is shown in

Device Manager

with a yellow question or exclamation mark.

Right-click your device and click

Uninstall

. Then repeat from step 2 in

Installing a driver

(page 75)

❑

Double-clicking the category of your device in the device manager list does not display your device.
You have to remove your device. Please refer to

Uninstalling a driver

(page 78)

to remove it. Then

repeat from step 2 in

Installing a driver

(page 75)

❑

Double-clicking

Other devices

displays your device.

You have to right-click your device, then click

Uninstall

. Repeat from step 2 in

Installing a driver

(page 75)

Summary of Contents for PCV-RX402





























































































Search results

Summary of Contents for PCV-RX402

Reviews:

Related manuals for PCV-RX402

Brands by name

Popular brands

Sony PCV-RX402, Software Manual

Search results

Summary of Contents for PCV-RX402

Reviews:

Related manuals for PCV-RX402

Brands by name

Popular brands