Sony PCV-RX260DS - Vaio Digital Studio Desktop Computer Reference Manual Download

Page: 53 / 114

Removing, Installing, and Replacing Components

Slide the drive holder up and out.

Slide the new drive into the bottom part of the drive holder and align
the holes on each side of the drive holder.

Secure the drive to the drive holder using screws in each of the two
holes on each side of the drive holder (screws are provided with the
new drive). Do not overtighten the screws.

Slide the drive holder back into the chassis so that the edge of the
holder is flush with the chassis.

KY0082.VSD

KY0083.VSD

Summary of Contents for PCV-RX260DS - Vaio Digital Studio Desktop Computer



















































































































Search results

Summary of Contents for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Reviews:

Related manuals for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Brands by name

Popular brands

Sony PCV-RX260DS - Vaio Digital Studio Desktop Computer, Reference Manual

Search results

Summary of Contents for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Reviews:

Related manuals for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Brands by name

Popular brands